QV210C
Contents Safety Precautions..........................................................2-4 Antenna connection.........................................................4 Location of Controls (Main Unit)......................................5 Remote Control Units......................................................6 TV Reciever Operation Tuning Operation Auto Search ...................................................................7 Manual Search ..............................................................
CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO PREVENT ELECTRIC SHOCK. DO NOT REMOVE COVER (OR BACK).NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
CAUTION Never replace with any components inside your set, or any other adjustment controls not mentioned in this manual. All television receivers are high voltage instruments. Your PICTURE TUBE is highly evacuated. If broken, glass fragments will be violently expelled. Scratching, shipping or undue pressure is dangerous and should be avoided. When you dust or wipe the PICTURE TUBE FACE or CABINET, the power plug should be pulled out from the socket , then wipe the receiver with a dry soft cloth.
IMPORTANT SAFEGUARDS PREFITTED MAINS PLUGS For you convenience a mains plug has been fitted to this appliance. For your safety please observe the following information. 1. CAUTION: Under no circumstances should the discarded plug be inserted into the mains socket. To prevent a shock hazard carefully dispose of the discarded plug. 2. Do not leave the plug lying around where children might see it. 3. WARNING: To prevent fire or shock hazard do not expose power plug to rain or moisture.
LOCATION OF CONTROLS 9. 10. 11. 12. 13. 14. 15. /Pause 16. 17. 18. 4. 5. 9 11 13 15 17 18 16 14 12 10 .5.
REMOTE CONTROL UNIT 1. Standby Button 2. TV/DVD Remote shift Button 3. TV Numeric Button * DVD Numeric Button 4. Two and three Digital Program Button * Two Digital Program Button 5. Setup Buttons (Blue) * Setup Buttons 6. Channel Button (P+) 7. Volume Button(V-) 8. Channel Button (P-) 9. Game Button 10. Menu Button * A-B Button * Menu Button 11. AVL Button * Repeat Button 12. * Play (ENTER) Button 13. * Play/Pause Button 14. * Open/Close Button 15. Time Button * Stop Button 16. * Previous Button 17.
TV RECIEVER OPERATION Connect your TV antenna to the antenna input socket located on the back of the TV. Push the Main Power Switch, power Indicator will be illuminated. When there is no signal,the TV will require tuning the available TV programs in your area. The operation is as follows: Program Operation TUNING Auto Search Use the Auto Store method to automatically store into the memory. This method will store TV programs in order of reception 1,2,3 etc. or all set PROG. AUTO SEARCH FREQ.
Program Swap PROG. SWAP Use this function can arrange the program list to your own's mind . PROG. 1 PROG. 2 SWAP 1. Select PROG. SWAP menu by pressing menu button continuously. 2. Press P+ / P- button to select " PROG. 1 " 1 2 YES? 3. Press V+ / V- button to select the first program number that you want to exchange 4. Press P+ / P- button to select " PROG. 2 " 5. Press V+ / V- button to select the program number that you want to exchange with the first one 6. Press P+ / P- button to select " SWAP " 7.
Set On/off Time and Program 1. Press P+ / P- button to select the " TIMER OFF "use V+ / V- button to set hour at 23 , then select minute and set it to 30 . 2. Press P+ / P- button to select the " TIMER ON "use V+ / V- button to set hour at 7 , and then select minute and set it to 30 . 3. Press P+ / P- button to select the " PROGRAM "use V+ / V- button to set the program number as 8 . Set Sleep Timer 1.
OPERATING WITH REMOTE CONTROL Program Selection: 1. Program Number Up and Down Press the "P+ " or "P- " button to select a higher or lower program number. 2. 0 - 9 Digital Button To select TV stations using program numbers 0 - 9, selecting program number will be shown in the left corner of the top of screen. 3. Two Digital Program Number To select TV station using program numbers "10" - "99".
DVD PLAYER OPERATION Basic Operation 1. Press TV/DVD button on the remote controller or DVD button on the TV set to turn on ( or off ) DVD . 2. Press OPEN / CLOSE button to load disc into disc tray. 3. Press OPEN / CLOSE button to close the tray. Hold the disc without touching either of its surfaces, position it with the printed title side facing up, align it with the guides, and place it in its proper position.
Digital Output This is used to set the audio output SPDIF Off An analog surround sound format Is output through the back-panel Audio output connectors . SPDIF/ RAW This surround sound format is output to a Dolby digital decoder through the optical and coaxial connectors. SPDIF/ PCM This surround sound format is output to a PTS decoder through the optical and coaxial connects.
Dynamic This option is used to set the compression ratio in order to control the sound (volume) contrast. General Audio Dolby Video Preference -- Dolby Digital Setup -FULL Dual Mono Dynamic 3/4 1/2 1/4 OFF Go To Dolby Digital Setup 4.
5.Preference Setup You must press STOP twice to enter Preference Page TV Type PAL This is selected when the player is connected to an PAL System TV. MULTI The player will set the TV system according to the disc in the tray. NTSC This is selected when the player is connected to a NTSC System TV. * * * Audio If a language listed below is recorded on the disc, you can play the sound in such language. If not, the language recorded will be used.
Parental When playing disc with parental lock function, you may select an Age Control Grade according to grade of disc and your own preference. For example, if PG is selected, DVD Video disc rated higher than the PG grade cannot be played. KID SAFE GP G PG 13 PG R RN C 17 ADULT * * * * * * * * Password User can change the password that is required when the user wants to change the Age Control Grade in the Parental Lock function.
DVD OPERATIONS Play Discs 1. Press the OPEN/CLOSE Button ( ) on the front panel and load the Disc on the tray. The label side should be facing upwards. For a Double-sided DVD Disc, put the disc with label A/1 up. 2. Press the OPEN/CLOSE ( ) button again to close the tray and the disc will be loaded. 3. The Disc will be played automatically. disc, it will show the Menu/Title Page on the screen. *IfIf itit isis aa DVD CD, it will play the first track directly. *4.
Repeat A-B This function is applicable for DVD and CD audio. User can specify the repeating interval by marking the starting point and the end point. 1. Press the A-B Button to mark the starting point (Playback will continue). 2. Press the A-B Button to mark the end point.(The marked part will be repeated automatically) Note : Press the A-B Button during repetition will disable the Repeat mode. Subtitle This function is only applicable for DVD disc. It can change the subtitle language shown on the screen.
Program Mode This function is applicable for DVD audio only. User can assign the playback sequence according to his/her preference. For CD audio, user can assign the track sequence while for DVD disc, user can assign both the Title and Chapter sequence. DVD 1. Press the PROGRAM Key. The Program Sequence table will be shown on the screen. Program: TT(02)/CH(--) TT: CH TT: CH TT: CH TT: CH TT: CH TT: CH TT: CH TT: CH TT: CH TT: CH EXIT 2.
Picture CD The unit can also be used to navigate picture CDs. Insert a picture CD into the tray and The disc will be loaded automatically. If the disc type can be identified, the player will start showing the pictures one by one (Slide Show Mode). Operations During Slide Show Mode: 1.Press the MENU Button will shift to the Digest Mode in which 12 pictures will be shown on the screen each time. 2.Press the PAUSE Button will freeze the screen so that the current picture can be Held for a long time.
SPECIFICATIONS TV SECTION Receiving Channels VHFL CH 2 - 4 VHFH CH 5 - 12 UHF CH 21- 69 Tuner Type 250Channel , VS TUNING According to the channel frequency of CCIR, OIRT international standard and NTSC system standard, add CATV channels.
Guide to trouble-shooting The following phenomena are not necessary faults, and the following checks should be performed first before asking a specialized person for repair. If the cause of fault cannot be found and corrected with this guideline, remove the power plug from the socket and have a specialized person to repair it.
