Product Description

3 / 20
Charging system V1.0
Charging system V2.0 (pocket charger)
2. Operation instructions
2.1 Charging
2.1.1 Use of charging system V1.0
1 Connect the power adapter, connecting wire and charging
dock, and switch on the power supply.
(As shown in the right), the power indicator on the right side of
charging dock is green, which indicates the power on.
2 Ensure that BTE and ITM dry.
③ Snap BTE and ITM into the slot of charging dock
respectively (as shown in the right figure).
• Orange light of corresponding indicator indicates
charging and green for full.
• After the power is exhausted, it can be fully charged
Warning: Use only the system Charger and power adapter provided. Other power
adapters may look similar but may cause damage to your SoundBite device
Charging dock
Charging jack
Travel case
BTE
Switch
Power adapter
Connecting line
Charging plug
ITM
Charging dock
Charging jack
BTE
Switch
Power adapter
Connecting line
Charging plug
ITM
Orange or
green when
LED lights on