Installation & Assembly

November 15, 2019

2 of 2

Assembly Instructions

INSTRUCTIONS D’INSTALLATION

Radio Series - 18”, 24”, 32”, 40” LED Bath Bar

Important

• Always disconnect the power before installing or replacing parts and before cleaning or other maintenance.

• Consult a qualied, licensed electrician to ensure correct branch circuit conductor.

Consulter un électricien qualié pour vous assurer que les conducteurs de la dérivation sont adéquats.

3951, 3952, 3953, 3954

Note:

• This xture is dimmable with Electronic Low Voltage (Trailing-Edge), Incandescent (Leading-Edge), and 0-10V type

dimmers only.

Care Instructions

• Dusting: Use a clean, dry cloth.

• Cleaning: To protect the nish, avoid any harsh abrasives or chemicals.

1. Shut o power to the outlet box (A).

2. Make appropriate electrical connections using wire nuts:

a. Connect the LED driver’s (B) live wire (black) to the outlet box live wire.

b. Connect the LED driver’s neutral wire (white) to the outlet box neutral wire.

c. Connect the xture’s (C) ground wire (green or uncoated) to the outlet box

ground wire. If no ground is present in outlet box, connect xture’s ground

wire to the mounting plate (D) using the green screw (included).

d. Connect low voltage output wires from LED driver to wires from light

xture: red to red and black to black.

e. Carefully place connections and LED driver in outlet box.

3. Attach the mounting plate (D) to the outlet box (A), secure with outlet box

screws (E), mounting screws (F), and anchors (G).

4. Install xture (C) on the mounting plate (D) and secure using set screws (H).

5. Restore power to the outlet box (A).

3951

3952

3953

3954