Installation & Assembly

November 13, 2019

2 of 2

Assembly Instructions

INSTRUCTIONS D’INSTALLATION

Tuo Series - 18”, 24”, 32”, 40” LED Bath Bar

Important

• Always disconnect the power before installing or replacing parts and before cleaning or other maintenance.

• Consult a qualied, licensed electrician to ensure correct branch circuit conductor.

Consulter un électricien qualié pour vous assurer que les conducteurs de la dérivation sont adéquats.

3921, 3922, 3923, 3924

Note:

• This xture is dimmable with ELV (Trailing-Edge), Incandescent (Leading-Edge), and 0-10V type dimmers only.

Care Instructions

• Dusting: Use a clean, dry cloth.

• Cleaning: To protect the nish, avoid any harsh abrasives or chemicals.

1. Shut o power to the outlet box (A).

2. Attach the mounting plate (D) to the outlet box (A), secure with outlet box

screws (E).

3. Make appropriate electrical connections using wire nuts:

a. Connect the LED driver’s (B) live wire (black) to the outlet box live wire.

b. Connect the LED driver’s neutral wire (white) to the outlet box

neutral wire.

c. Connect the xture’s (C) ground wire (green or uncoated) to the outlet box

ground wire. If no ground is present in outlet box, connect xture’s ground

wire to the mounting plate (D) using the green screw (included).

d. Carefully place connections in outlet box.

4. Install xture (C) on the mounting plate (D) and secure using set

screws (F) with included Allen wrench.

5. Restore power to the outlet box (A).

3921 3922

3923

3924