Installation & Assembly

November 21, 2019

2 of 2

Assembly Instructions

INSTRUCTIONS D’INSTALLATION

Ilios Series- 6" Surface Mount

Important

• Always disconnect the power before installing or replacing bulbs and before cleaning or other maintenance.

• Consult a qualied, licensed electrician to ensure correct branch circuit conductor.

Consulter un électricien qualié pour vous assurer que les conducteurs de la dérivation sont adéquats.

1. Shut off power to the outlet box (A).

2. Make appropriate electrical connections using wire nuts:

a. Connect the LED driver’s (B) live wire (black) to the live outlet

box wire.

b. Connect the LED driver’s (B) neutral wire (white) to the

neutral outlet box wire.

c. Connect the xture’s ground wire (green or uncoated) to

the ground outlet box wire. If no ground is present in outlet

box, connect xture’s ground wire to the mounting plate (C)

using the green screw (included).

d. Connect low voltage output wires from LED driver to wires

from light xture: red to red and black to black.

e. Carefully place connections in outlet box (A).

3. Attach the mounting plate (C) to the outlet box (A), secure with

outlet box screws (D).

4. Install xture (E) to mounting plate (C) by aligning keys (F)

through key-holes (G) in xture and rotating clockwise.

5. Restore power to the xture.

Note

• This xture is dimmable with Electronic Low Voltage (Trailing-Edge) type and Incandescent (Leading-Edge) type

dimmers. For best performace, we recommend using an Electronic Low Voltage dimmer.

Care Instructions

• Dusting: Use a clean, dry cloth.

• Cleaning: To protect the nish, avoid any harsh abrasives or chemicals.

3733