Installation & Assembly

2 of 2

November 21, 2019

Assembly Instructions

INSTRUCTIONS D’INSTALLATION

Ilios Series- 10" LED Surface Mount, 14" LED Surface Mount, 18" LED Surface Mount

Important

• Always disconnect the power before installing or replacing bulbs and before cleaning or other maintenance.

• Consult a qualied, licensed electrician to ensure correct branch circuit conductor.

Consulter un électricien qualié pour vous assurer que les conducteurs de la dérivation sont adéquats.

1. Shut off power to the outlet box (A).

2. Attach the mounting plate (C) to the outlet box (A), secure with

outlet box screws (D).

3. Make appropriate electrical connections using wire nuts:

a. Connect the LED driver’s (B) live wire (black) to the live outlet

box wire.

b. Connect the LED driver’s (B) neutral wire (white) to the neutral

outlet box wire.

c. Connect the xture’s ground wire (green or uncoated) to

the ground outlet box wire. If no ground is present in outlet

box, connect xture’s ground wire to the mounting plate (C)

using the green screw (included).

d. Connect low voltage output wires from LED driver to wires

from light xture: red to red and black to black.

e. Carefully place connections in outlet box (A).

4. Install xture (E) to mounting plate (C) by aligning keys (F)

through key-holes (G) in xture and rotating clockwise.

5. Restore power to the xture.

Note

• This xture is dimmable with Electronic Low Voltage (Trailing-Edge) type, Incandescent

(Leading-Edge) and 0-10V type dimmers.

Care Instructions

• Dusting: Use a clean, dry cloth.

• Cleaning: To protect the nish, avoid any harsh abrasives or chemicals.

3734, 3735, 3736

3734

3735

3736