Installation Sheet

Assembly Instructions for item : 1870F,1871F

Pannelo Series - Sconce

1. Shut off power to outlet box (Fig A).

2. Make appropriate electrical connections using wire nuts:

a.Connect the fixture’s hot wire (black) to the black outlet box wire.

b.Connect the fixture’s neutral wire (white) to the white outlet box wire.

c.Connect fixture’s ground wire (green or uncoated) to the ground outlet

box wire. If no ground is present in outlet box, connect fixture’s ground

wire to the mounting plate using the green screw (included).

d. Carefully place connections in outlet box.

3. Place mounting plate over outlet box and secure it with

outlet box screws.

4. Attach the backplate over the mounting plate (Fig B)

and tighten with the back plate screws on top.

5. Insert 18W 2G11 base twin CFL in sockets (not included).

6. Attached the shade by lining up the keyholes with the keyhole screws

and pushing the shade down until tight. (Fig C)

7. Restore power to fixture.

Assembly & Installation Instructions

This light should be installed by a licensed electrician

mounting plate

socket

outlet box screws

back plate screws

OFF

Important: Always disconnect the power before installing or replacing bulb and before cleaning or other maintenance.

shade

18W 2G11 base twin CFL

back plate

1871F

keyhole

keyhole screw

1870F