Installation Sheet

Important: Always disconnect the power before installing or replacing bulbs and before cleaning or other maintenance.

This light should be installed by a licensed electrician

LAMP INSTALLATION AND ASSEMBLY

1. Shut off power to the outlet box. (ﬁg. A)

2. Loosen the hex nuts on back plate, grasp the spacer, and slide the ﬁxture to desired position,

feeding the ﬁxture cord through the back plate as needed. Tighten the hex nut to set.

3. Make appropriate electrical connections using wire nuts:

a. Connect the LED driver’s live wire (brown/black) to the live outlet box wire.

b. Connect the LED driver’s neutral wire (blue/white) to the neutral outlet box wire.

c. Connect ﬁxture’s ground wire (green or uncoated) to the ground outlet

box wire. If no ground is present in outlet box, connect ﬁxture’s ground

wire to the mounting plate using the green screw (included).

d. Carefully place connections and LED driver in outlet box.

4. Attach the mounting plate to the outlet box, secure with outlet box screws.

5. Connect the male quick connector from the ﬁxture to the female quick

connector from the driver. The quick connector is polarized and will only ﬁt together

the correct way. Do not force the connector together backwards or damage will occur.

6. Store any excess ﬁxture cord in the back plate.

7 Attach the back plate to the mounting plate, secure with mounting screws.

8. Restore power to the ﬁxture. CAUTION: The ﬁxture must be connected to the

driver before restoring the power, or damage will occur.

CARE INSTRUCTIONS

Dusting – Use a clean, dry cloth.

Cleaning – To protect the ﬁnish,

avoid any harsh abrasives or chemicals.

Fingerprints on the acrylic can be removed with rubbing alcohol.

NOTE: This fixture is dimmable with Electronic

Low Voltage (Trailing-Edge) and

Incandescent (Leading-Edge) type dimmers.

For best performance, we recommend

using an Electronic Low Voltage dimmer.

Assembly Instructions for item : 2340-DIM, 2342-DIM

Stiletto Series - 24" Dimmable LED Sconce/Bath Bar

32" Dimmable LED Sconce/Bath Bar

mounting screw

outlet box

back plate

mounting plate

outlet box screw

LED driver

spacer

hex nut

male quick connector

2340-DIM

2342-DIM

female quick connector