Installation Sheet

Important: Always disconnect the power before installing or replacing bulbs and before cleaning or other maintenance.

Assembly Instructions for item : 2369

Corner Eclipse Series - LED Sconce

This light should be installed by a licensed electrician

LAMP INSTALLATION AND ASSEMBLY

1. Shut off power to the outlet box. (ﬁg. A)

2. Make appropriate electrical connections using wire nuts:

a. Connect the transformer’s live wire (black) to the live outlet box wire.

b. Connect the transformer’s neutral wire (white) to the neutral outlet box wire.

c. Connect ﬁxture’s ground wire (green or uncoated) to the ground outlet

box wire. If no ground is present in outlet box, connect ﬁxture’s ground

wire to the mounting plate using the green screw (included).

d. Carefully place connections and transformer in outlet box.

3. Attach the mounting plate to the outlet box, secure with outlet box screws.

4. Attach the back plate to the mounting plate by inserting the posts into the slots on the

back plate, then sliding the ﬁxture down. Tighten the posts with a screwdriver to lock.

5. Restore power to the ﬁxture.

CARE INSTRUCTIONS

Dusting – Use a clean, dry cloth.

Cleaning – To protect the ﬁnish,

avoid any harsh abrasives or chemicals.

outlet box

back plate

mounting plate

outlet box screw

transformer

Note: This fixture is dimmable with Electronic Low

Voltage (Trailing-Edge) type dimmers only.

post

slot