Installation & Assembly

Important: Always disconnect the power before installing or replacing bulbs and before cleaning or other maintenance.
©2013 SONNEMAN - A WAY OF LIGHT
This light should be installed by a licensed electrician
LAMP INSTALLATION AND ASSEMBLY
1. Shut off power to the outlet box. (fig. A)
2. Attach the mounting plate to the outlet box, secure with outlet box screws.
Use anchors and wood screws for extra support (included)
3. Determine the height at which the fixture is to be hung. Use wrench to loosen set
screws.(fig. B) Adjust the cords to the desired length and, if necessary, cut cords to
length plus six inches. Tighten set screws to set.
4. Adjust the cord locks in canopy to prevent slippage.
5. Make appropriate electrical connections using wire nuts:
a. Connect the fixture’s live wire (black) to the live outlet box wire.
b. Connect the fixture’s neutral wire (white) to the neutral outlet box wire.
c. Connect fixture’s ground wire (green or uncoated) to the ground outlet
box wire. If no ground is present in outlet box, connect fixture’s ground
wire to the mounting plate using the green screw (included).
d. Carefully place connections in outlet box.
6. Attach canopy to mounting plate, secure with finial.
7. Line up the hole on large washer 1, glass and large washer 2, and attach them
to the socket cups, secure with socket rings. If the glass is not in the center after
hang up, loosen the socket ring a little, adjust the glass to make hang level,
then tighten the socket ring to secure.
8. Install 60W medium base bulbs (not included).
9. Restore power to the fixture.
CARE INSTRUCTIONS
Dusting – Use a clean, dry cloth.
Cleaning – To protect the finish,
avoid any harsh abrasives or chemicals.
Assembly Instructions for item : 3563-3, 3566-3, 3567-3
Glass Pendants Series - 3-Light Cone, 3-Light Oval, 3-Light Grand Oval
canopy
mounting plate
glass
outlet box screw
medium base bulb
socket ring
finial
socket cup
cord lock
outlet box
anchor
wood screw
3566-3
3567-3
3563-3
wrench
set screw
large washer 1
Fig. B
large washer 2