Installation Sheet

Assembly Instructions for item : 3682,3682F

Dakota Series - Square Sconce

1. Shut off power to outlet box (Fig A).

2. Make appropriate electrical connections using wire nuts:

a.Connect the fixture’s live wire (black) to the live outlet box wire.

b.Connect the fixture’s neutral wire (white) to the neutral outlet box wire.

c.Connect fixture’s ground wire (green or uncoated) to the ground outlet

box wire. If no ground is present in outlet box, connect fixture’s ground

wire to the mounting plate using the green screw (included).

d. Carefully place connections in outlet box.

3. Place mounting plate over outlet box and secure it with outlet box

screws.

4. Attach the backplate over the mounting plate and tighten with the back

plate nuts.

5. 3682 - Install candelabra bulbs in sockets (not included).

3682F -Insert 13W quad CFL G24q-1 base (not included).

6. Assemble inner glass diffuser, glass diffuser spacer,outer glass diffuser onto

fixture threaded stems. Attach glass diffuser holder to fixture and secure

with thumb screw.

7. Restore power to fixture.

CARE INSTRUCTIONS

Dusting – Use a clean, dry cloth.

Cleaning – To protect the finish,

avoid any harsh abrasives or chemicals.

Assembly & Installation Instructions

This light should be installed by a licensed electrician

mounting plate

inner glass diffuser

outlet box screws

back plate screw

OFF

outlet box

Important: Always disconnect the power before installing or replacing bulb and before cleaning or other maintenance.

candelabra bulb

back plate

fixture

outer glass diffuser

glass diffuser spacer

back plate nut

glass diffuser holder

thumb screw

fixture threaded stem