Installation Sheet

Important: Always disconnect the power before installing or replacing bulbs and before cleaning or other maintenance.

Assembly Instructions for item : 4294

Chelsea Series - 3-Arm Pendant

This light should be installed by a licensed electrician

LAMP INSTALLATION AND ASSEMBLY

1. Shut off power to the outlet box. (ﬁg. A)

2. Determine the height at which the ﬁxture is to be hung.

Screw together stem sections to achieve desired length.

3. The cord length can be shortened if necessary by cutting cord to length plus six inches.

4. Attach the universal mounting plate to the outlet box, secure with outlet box screws.

5. Make appropriate electrical connections using wire nuts:

a. Connect the ﬁxture’s live wire (black) to the live outlet box wire.

b. Connect the ﬁxture’s neutral wire (white) to the neutral outlet box wire.

c. Connect ﬁxture’s ground wire (green or uncoated) to the ground outlet

box wire. If no ground is present in outlet box, connect ﬁxture’s ground

wire to the mounting plate using the green screw (included).

d. Carefully place connections in outlet box.

6. Attach the canopy to the universal mounting plate, secure with canopy nuts.

7. Install 60W medium base bulbs (not included).

8. Attach glass to glass holder, tighten with silicone washers and thumb screws.

NOTE: The cord the glass holder is hanging from is NOT adjustable.

9. Restore power to the ﬁxture.

CARE INSTRUCTIONS

Dusting – Use a clean, dry cloth.

Cleaning – To protect the ﬁnish,

avoid any harsh abrasives or chemicals.

outlet box

canopy

universal mounting plate

outlet box screw

canopy nut

glass

medium base bulb

silicone washer

thumb screw

glass holder

stem