Installation Sheet

Important: Always disconnect the power before installing or replacing bulb and before cleaning or other maintenance.

Assembly Instructions for item : 4930, 4931

Tribeca Series - Sconce

This light should be installed by a licensed electrician

LAMP INSTALLATION AND ASSEMBLY

1. Shut off power to the outlet box. (ﬁg. A)

2. Attach the universal mounting plate to the outlet box, secure with outlet box screws.

3. Make appropriate electrical connections using wire nuts:

a. Connect the ﬁxture’s live wire (black) to the live outlet box wire.

b. Connect the ﬁxture’s neutral wire (white) to the neutral outlet box wire.

c. Connect ﬁxture’s ground wire (green or uncoated) to the ground outlet

box wire. If no ground is present in outlet box, connect ﬁxture’s ground

wire to the mounting plate using the green screw (included).

d. Carefully place connections in outlet box.

4. Attach back plate to universal mounting plate, tighten with cap nuts.

5. Place threaded socket through the small hole in the glass, and secure by screwing

the glass holder to the threaded socket.

6. Option 1: Install 75W medium base bulb (not included), and screw the mesh

shade to threaded socket.

Option 2: Screw the socket ring to threaded socket, and install 75W medium

base bulb (not included).

7. Restore power to the ﬁxture.

CARE INSTRUCTIONS

Dusting – Use a clean, dry cloth.

Cleaning – To protect the ﬁnish,

avoid any harsh abrasives or chemicals.

outlet box

back plate

universal mounting plate

glass

outlet box screw

medium base bulb

mesh shade

cap nut

glass holder

socket ring

threaded socket