Assembly Instructions

Important: Always disconnect the power before installing or replacing bulbs and before cleaning or other maintenance.

This light should be installed by a licensed electrician

LAMP INSTALLATION AND ASSEMBLY

1. Shut off power to the outlet box. (ﬁg. A)

2. Attach the mounting plate to the outlet box, secure with outlet box screws.

3. Make appropriate electrical connections using wire nuts:

a. Connect the ﬁxture’s live wire (black) to the live outlet box wire.

b. Connect the ﬁxture’s neutral wire (white) to the neutral outlet box wire.

c. Connect ﬁxture’s ground wire (green or uncoated) to the ground outlet

box wire. If no ground is present in outlet box, connect ﬁxture’s ground

wire to the mounting plate using the green screw (included).

d. Carefully place connections in outlet box.

4. Attach the back plate to the mounting plate, secure with mounting screws.

5. Install 60w medium base T-type bulbs. (not included)

6. Screw the mesh shades to threaded sockets.

7. Restore power to the ﬁxture.

CARE INSTRUCTIONS

Dusting – Use a clean, dry cloth.

Cleaning – To protect the ﬁnish,

avoid any harsh abrasives or chemicals.

outlet box

back plate

mounting plate

outlet box screw

medium base bulb

mesh shade

mounting screw

threaded socket

Assembly Instructions

2-Light Sconce

PAGE 1
Assembly Instructions 2-Light Sconce Important: Always disconnect the power before installing or replacing bulbs and before cleaning or other maintenance. This light should be installed by a licensed electrician LAMP INSTALLATION AND ASSEMBLY 1. Shut off power to the outlet box. (fig. A) 2. Attach the mounting plate to the outlet box, secure with outlet box screws. 3. Make appropriate electrical connections using wire nuts: a. Connect the fixture’s live wire (black) to the live outlet box wire. b.