Installation & Assembly

1 of 2

October 31, 2019

LED Product Information and Warnings

Important

• Always disconnect the power before installing or replacing bulbs and before cleaning or other maintenance.

• Consult a qualied, licensed electrician to ensure correct branch circuit conductor.

• Please read all included assembly instructions and warnings carefully before installation. Contact

Customer Service if you have any questions or concerns. Before installation, please conrm that the xture

is compatible with your supply voltage and dimming system, if present.

• LEDs are highly sensitive electronic devices, and must be treated with care. Do not open any factory

sealed compartments, and avoid touching the LEDs with your hands or any object.

• Although all our xtures are equipped with protective devices, LED xtures are vulnerable to power surges

and supply variations. Do not install LED xtures on the same circuit as any motors, appliances, or HVAC

systems.

• Do not remove or bypass any LED Driver or Transformer that is provided with the xture, and do not

replace or substitute with another power supply.

• Remote LED Driver or Transformer installation must be done by a licensed electrician and in accordance

with local codes. Remote installations should be in an accessible location, as close to the xture as possible.

• Fixtures must be wired in parallel on independent leads; do not "daisy chain" multiple xtures together or

wire them in series.

• All factory-made splices and connections must remain intact. LED circuits are carefully designed and built,

and improper connections may damage the xture.

• The ends of coaxial pendant cords have been precisely stripped and split at the factory and must not be

eld cut. Excess cord or cable should be neatly coiled and reserved in the xture canopy.

• Any mounting hardware is provided for your convenience and should be used with discretion. Always use

the appropriate hardware for the mounting surface.

PAGE 1
October 31, 2019 LED Product Information and Warnings Important • Always disconnect the power before installing or replacing bulbs and before cleaning or other maintenance. • Consult a qualified, licensed electrician to ensure correct branch circuit conductor. • Please read all included assembly instructions and warnings carefully before installation. Contact Customer Service if you have any questions or concerns.
PAGE 2
October 31, 2019 Assembly Instructions 1767, 1768 INSTRUCTIONS D’INSTALLATION Malibu Discs Series - 14", 18" Pendant Important • Always disconnect the power before installing or replacing bulbs and before cleaning or other maintenance. • Consult a qualified, licensed electrician to ensure correct branch circuit conductor. Consulter un électricien qualifié pour vous assurer que les conducteurs de la dérivation sont adéquats. 1. 2. Shut off power to the outlet box (A).
PAGE 3
October 31, 2019 Coax Splicing Assembly Instructions INSTRUCTIONS D’INSTALLATION FAILURE TO FOLLOW THESE INSTRUCTIONS WILL VOID THE WARRANTY Coaxial Power Cord: Outer Braided Conductor Inner Stranded Conductor End View Insulation Outer Jacket If field-cutting is required, please follow the below instructions: 1. Make a 1” slice along the length of the cord's outer jacket (Fig. 1). CAUTION: Do not cut through the outer braided conductor. 2.