Installation & Assembly

2 of 2

October 31, 2019

Assembly Instructions

INSTRUCTIONS D’INSTALLATION

Malibu Discs Series - 14", 18" Pendant

Important

• Always disconnect the power before installing or replacing bulbs and before cleaning or other maintenance.

• Consult a qualied, licensed electrician to ensure correct branch circuit conductor.

Consulter un électricien qualié pour vous assurer que les conducteurs de la dérivation sont adéquats.

Note:

• This xture is dimmable with ELV (Trailing-Edge), Incandescent (Leading-Edge), and 0-10V type dimmers only.

Care Instructions

• Dusting: Use a clean, dry cloth.

• Cleaning: To protect the nish, avoid any harsh abrasives or chemicals.

1767, 1768

1767

1. Shut o power to the outlet box (A).

2. Feed the power cords (B) through the bushings (D) and adjust to desired

height. Use included screwdriver (E) to tighten set screws (F) in bushing to

secure cords. Reserve extra cord in the canopy (L).

3. Attach the mounting plate (J) to the outlet box using the outlet box

screws (K) as shown in the Detailed View.

4. Make appropriate electrical connections using wire nuts:

a. Connect the LED driver’s (H) live wire (black) to the live outlet box wire.

b. Connect the LED driver’s (H) neutral wire (white) to the neutral outlet

box wire.

c. Connect the xture’s ground wire (green or uncoated) to the ground

outlet box wire. If no ground is present in outlet box, connect

xture’s ground wire to the mounting plate (J) using the green screw

(included).

d. Carefully place connections in outlet box (A).

5. Attach the canopy (L) to the mounting plate (J), secure with screws (M).

6. Restore power to the xture.

1768