Installation & Assembly

ManualsBrandsSonneman ManualsCeiling LightsRinglo 1 - Light Unique / Statement Geometric LED Pendant

Important: Always disconnect the power before installing or replacing bulbs and before cleaning or other maintenance.

Assembly Instructions for item : 2418, 2419

Ringlo

Series - 24" LED Ceiling Torchiere, 36" LED Ceiling Torchiere

This light should be installed by a licensed electrician

LAMP INSTALLATION AND ASSEMBLY

1. Unscrew the small screws and remove the canopy from the short stem.

Keep the small screws and canopy. (Fig. 1)

2. Unscrew the long screw, remove the stem block and the short stem, and pull

the wire out of the short stem. Keep the long screw, stem block, and shade. (Fig. 1)

3. Shut off power to the outlet box. (ﬁg. A)

4. Feed the wires in through the short slot on the stem and out the top end of the stem. (Fig. 2)

5. Insert the post on the shade into the long slot on the stem. Insert the long screw through

the stem block and stem, and screw into the threaded hole on the post to secure the

shade to the stem, being careful not to pinch the wires with the long screw. (Fig. 2)

6. Insert the wires and stem into the upper stem, and secure with the small screws.

7. Attach the mounting plate to the outlet box, secure with outlet box screws.

8. Make appropriate electrical connections using wire nuts:

a. Connect the ﬁxture’s live wire (black) to the live outlet box wire.

b. Connect the ﬁxture’s neutral wire (white) to the neutral outlet box wire.

c. Connect ﬁxture’s ground wire (green or uncoated) to the ground outlet

box wire. If no ground is present in outlet box, connect ﬁxture’s ground

wire to the mounting plate using the green screw (included).

d. Carefully place connections in outlet box.

9. Attach the canopy to the mounting plate, secure with mounting screws.

10. Restore power to the ﬁxture.

CARE INSTRUCTIONS

Dusting – Use a clean, dry cloth.

Cleaning – To protect the ﬁnish,

avoid any harsh abrasives or chemicals.

NOTE: This fixture is dimmable with Electronic

Low Voltage (Trailing-Edge) and

Incandescent (Leading-Edge) type dimmers.

For best performance, we recommend

using an Electronic Low Voltage dimmer.

2419

Fig. 1

long screw

stem block

small screw

upper stem

short stem

canopy

shade

outlet box

stem

mounting plate

outlet box screw

mounting screw

small screw

2418

top end

Fig. 2

long screw

stem block

post

short slot

long slot