Operation Manual

57
EN
Setting up the WLAN function on the air conditioner
Please proceed as follows to activate your device for WLAN remote control:
Connect the air conditioner to the power supply and ensure that the
device is not running.
Press and hold the SLEEP Button for about 5 Seconds or until a beep
tone appears. The Wifi Light should now be blinking rapidly.
The WLAN function of your device is now ready to connect.
5. OPERATING INSTRUCTIONS
Before starting to operate the device
– Find a place where there is a power supply nearby.
– Install the exhaust hose as shown in Fig. 5 and Fig. 5 A and adjust the window position well.
Fig. 5 Fig. 6Fig. 5 A