Operation Manual

29
4 Operation
5 Technical data
1) Use an AC power supply. Place the water tank into the dehumidifier. Plug the DC plug into
the DC port of the appliance and the adapter into the socket outlet. The power light will
turn on (blue) and the fan will run continuously.
2) If the red indicator lights up, please check if the water tank is in the correct position.
3) This dehumidifier will stop dehumidifyingautomatically if the water reaches the maximum
level and the red indicator will turn on, which means the water tank is full. Please cut off
the power supply before you take out the tank. Remove the black drain cover of the water
tank and discard the collected water. Then place it back.
4) Wipe and dry the water tank and the dehumidifier.
1) Adapter: 9 V DC, 2.5 Amp.
2) Power: 23.4 W
3) Portable water tank capacity: 500 ml
4) Water level sensor: The indicator will turn on in red when the water tank is full and the
appliance will shut down automatically.
5) Dehumidifying capability: 220 ml/24 hours
6) Area for dehumidifying: < 20 m
2
7) Size: 154 x 218 x 130 mm
8) Operating environment: temperature: > 15 °C relative humidity: > 45 %
GB