Operation Manual

30
6 Trouble shooting
7 Cleaning and maintenance
Problem Possible cause Solution
After connecting, the red
indicator lights up.
The water tank is full.
Empty the water tank
and place it back in the
correct position.
The float got jammed.
Press the float and put
the water tank back.
The dehumidifier does not
work.
The power supply is cut
off.
Check if the adapter is
plugged in.
DC switch is OFF. Turn the switch on.
The air outlet is blocked.
Maintain the minimum
clearance of at least 10
cm around the dehumi-
difier when the unit is
operating.
Before cleaning and maintenance please pull the plug out of the socket outlet. Wipe the shell
of the appliance with a soft damp cloth; never use abrasive agents and resolvents, as these
will damage this appliance.
GB