FUSION 500P ™ 5-Bay Serial ATA Drive Enclosure with port multiplier User’s Guide For Windows
Fusion 500P Specifications and Features Specifications Drive Tray (Bay 1) Drive Tray (Bay 2) Drive Tray (Bay 3) Drive Tray (Bay 4) Drive Tray (Bay 5) Drive Presence LED (Bay 1) Drive Activity LED (Bay 1) Drive Presence LED (Bay 2) Drive Activity LED (Bay 2) Drive Presence LED (Bay 3) Drive Activity LED (Bay 3) Drive Presence LED (Bay 4) Drive Activity LED (Bay 4) Drive Presence LED (Bay 5) Drive Activity LED (Bay 5) Compatibility Compatible with Mac, Windows, and Linux computers with SATA controller w
Introduction and Safety Precautions Introduction SAFETY PRECAUTIONS Sonnet’s Fusion 500P 5-bay Serial ATA (SATA) drive enclosure combines the versatility of hot-swap functionality with support for the fastest 3.5" SATA drives in a compact package. This enclosure supports 3 Gb/s drives and is backward compatible with 1.5 Gb/s drives, so you’ll get maximum flexibility in choosing drives for years to come.
Drive Installation and Enclosure Setup 1. Remove the Fusion 500P from its packaging, and place the enclosure near the computer to which it will be connected. 2. Push a lever release button toward the right until the lever pops out, and then pull the lever toward you to slide out and remove the drive tray (Figure 3). lever release button lever drive tray WARNING: When handling computer products, take care to prevent components from being damaged by static electricity; avoid working in carpeted areas.
Drive Installation and Enclosure Setup 7. Connect the supplied eSATA data cable between the enclosure and the SATA host controller in your computer; verify the connectors are plugged in securely (Figure 7). 8. Connect the supplied power cable between the Fusion 500P and a grounded wall outlet or power strip; verify the cable is plugged in securely. 9. Push the switch on the back of the enclosure to the ON position, and then power on your computer. eSATA data cable 10.
Tips and Additional Information Tips Limited Warranty This section covers some common sense tips for using the Fusion 500P enclosure. Sonnet Technologies, Inc. warrants that this product shall be free from defects in materials and workmanship for a period of three years following the date of original purchase. For complete warranty information, go to www.sonnettech.com.
This page intentionally left blank
Remember to register your product online at http://registration.sonnettech.com to be informed of future upgrades and product releases. Software updates and links are available from the Sonnet web site at www.sonnettech.com. • Online support form available at http://supportform.sonnettech.com. Sonnet Technologies Customer Service hours are Mon.-Fri., 7 a.m.–5 p.m. Pacific Time • Customer Service Phone: 1-949-472-2772 • E-mail: support@sonnettech.com Sonnet Technologies, Inc.