FUSION R400QR5 ™ 4-Bay Serial ATA Rackmount Disk Enclosure with Quad Interface User’s Guide For Windows
Fusion R400QR5 Specifications and Features Drive Presence LED (Bay 2) Drive Presence LED (Bay 1) Power LED Drive Presence LED (Bay 4) Ready Indicator LED Drive Presence LED (Bay 3) Drive Tray Drive Tray Drive Tray Drive Tray (Bay 1) (Bay 2) (Bay 3) (Bay 4) Drive Activity LED (Bay 3) Drive Activity LED (Bay 4) Power switch Drive Activity LED (Bay 1) Drive Activity LED (Bay 2) Figure 1 Mini-USB Connector FireWire 800 Connector Locking eSATA Connector Display and Controls Power Cable Connecto
Safety Precautions and Disclaimers SAFETY PRECAUTIONS DISCLAIMERS Please read this section carefully before proceeding. These precautions explain the correct and safe use of this device, thereby helping to prevent injury to you or others, and also help you to minimize the risk of damaging the device. Drive Usage: Sonnet Technologies has qualified the hard drives listed below for use in Fusion R400QR5 storage systems.
Drive Installation and Enclosure Setup 1. Remove the Fusion R400QR5 from its packaging, and place it on a flat, level surface. 2. If you intend to place the Fusion enclosure on a desktop or other flat surface, attach the included adhesive-backed feet to the bottom of the enclosure (Figure 3). foot 3. If you intend to use the Fusion enclosure in a rack, install the Sonnet rack slide set (or equivalent), sold separately: • FUS-RSS-P for 17–21.5" deep racks • FUS-RSS-S for 23–26.
Drive Installation and Enclosure Setup WARNING: When securing the trays to the hard drives, you must verify the screw heads are flush with the tray. Otherwise, a screw may catch on the enclosure and prevent you from removing it. screw 7. Using four of the supplied screws, secure the drive tray to the drive; tighten each screw to secure the tray snugly to the drive; do not overtighten the screws (Figure 7). drive tray screw screw screw Figure 7 8.
Drive Installation and Enclosure Setup Initial Drive Configuration When you first turn on the Fusion R400QR5 after installing the hard drives, you must configure the drives as a RAID 0 or RAID 5 set before formatting the virtual volume using your operating system drive formatting application. WARNING: Configuring the drives in your Fusion R400QR5 Detecting Disks –Re—Init? Detecting Disks waiting enclosure following the steps below requires you to reformat them.
Operating System Drive Formatting Instructions Mac OS Users’ Instructions 10. Depending on how you configured the RAID group, it may already be available to the system. Once the RAID group has been formatted and finishes building, it is ready to use. 1. Assuming your computer is on, after the Fusion R400QR5 configures the drives a Disk Insertion window will appear stating that there is an unreadable volume; click Initialize, and then Disk Utility will open.
Menus View the RAID Mode Fusion QR5 v1.0 –Menu 1. Press the button under Menu on the display; RAID Mode appears (Figure 11). 2. Press the button under Go on the display; the RAID mode appears (Figure 11). RAID Mode –Next 3. Press the button under Quit on the display to return to the main menu (Figure 11). Go– RAID5 4D – Q uit Fusion QR5 v1.
Menus View Drive S.M.A.R.T. Status Self-Monitoring, Analysis and Reporting Technology, or S.M.A.R.T., is a monitoring system for SATA drives to detect and report on various indicators of drive health. The S.M.A.R.T. feature keeps track and reports the status of SATA drive health using certain parameters recorded by the drives. The Fusion R400QR5 displays two possibilities: good, or failing. Drives marked as Failing should be replaced. Fusion QR5 v1.
Menus View Drive Temperatures SATA hard drives monitor their own temperature and report it to the Fusion R400QR5. Fusion QR5 v1.0 –Menu 1. Press the button under Menu four times; Disk Temp appears (Figure 14). Go– Drive:1: 37 –Next Error Statistics –Next Go– Drive:2: 36 –Next SMART Status –Next Go– Drive:3: 36 –Next Disk Temp – Q uit Drive:4: 35 – Q uit RAID Mode –Next 2. Press the button under Go on the display; Drive:1 temperature is displayed in degrees celsius (Figure 14). 3.
Tips and Additional Information Tips Contacting Sonnet Customer Service This section covers some tips for using the Fusion R400QR5 enclosure. USA Customers The Sonnet Web site located at www.sonnettech.com has the most current support information and technical updates. Before you call Sonnet Customer Service, please check our Web site for the latest updates and online support files, and check this User’s Guide for helpful information.
©2010 Sonnet Technologies, Inc. All rights reserved. Sonnet, the Sonnet logotype, Simply Fast, the Simply Fast logotype, Creativity Stored Here, and Fusion are trademarks of Sonnet Technologies, Inc. FireWire, Macintosh, Mac, the Mac logo, and Mac OS are trademarks of Apple Inc., registered in the United States and other countries. Other product names are trademarks of their respective owners. Product specifications subject to change without notice. Printed in the USA.