User Guide

>
3. Add sub-devices
Connect the Bridge before adding the sub-device
Access eWeLink APP, select the Bridge that you want to connect,
and tap “Add” to add a sub-device. Then long press reset button on
the device for 5s until the LED indicator flashes three times, which
means the device h a s entered the pairing mode, and be patient
until pairing completes.
ZBB ridge
Add ed:0
No c hild d evice ,plea se add .
Ad d
If the addition failed, move the sub-device closer to the Bridge and try again.
Specifications
Model
Battery model
Wireless connection
Working temperature
Working humidity
Material
Dimension
SNZB-02
CR2450(3V)
ZigBee (IEEE 802.15.4)
-10℃~40℃
10-90%RH (non-condensing)
PC
43x43x14mm