User's Manual

Rev.1.01
2022. 03.
18 / 96
Doc # : BN-SM-EOP-01
Chapter 3. Using SonoMe
3.1 Basic Information & B Mode
[Figure 3-1] B Mode
Information:
1. Gain +: Increase the brightness of the applicable Operation mode
2. Gain -: Decrease the brightness of the applicable Operation mode
3. Depth: Adjusts the scanning depth of an image. The range varies depending on
the probe in use
4. Focus: Adjusts the focus of an image
5. Dynamic: Adjusts contrast by changing the ratio of the minimum and maximum
values of input signals. The higher the value, the smoother the displayed image.
6. Harmonic: Optimize image using various frequency
7. Reject: Reduces noise or echoes from an image to make the image clearer
8. Image mode
８-１. 5CB & 10LB: B Mode Only
８-２. 5C, 10L, 14L, H5C10L, H5C, H10L
: B Mode, B/M Mode, Color Mode, PDI Mode, PW Mode