User Manual
Table Of Contents
- PLATNIUM_SE_SO-2000_operating_manual_cover_page4
- PLATINUM_SE_SO-2000_manual_R07
- Bedienungsanleitung
- 1. Einleitung
- 2. Lernen Sie Ihren PLATINUM SE kennen
- 3. Plattenspieler montieren
- 4. PLATINUM SE anschließen
- 5. Eine Aufnahme abspielen
- 6. Wenn die Wiedergabe beendet ist
- 7. Verbindung mit Bluetooth-Gerät herstellen
- 8. Anschließen an einen Computer
- 9. Wartung
- 10. Fehlerbehebung
- 11. Garantie
- 1. Introduction
- 2. Getting to know your PLATINUM SE
- 3. Assembling the turntable
- 4. Connecting PLATINUM SE
- 5. Playing a record
- 6. When playback finishes
- 7. Connecting with Bluetooth device
- 8. Connecting to a computer
- 9. Maintenance
- 10. Troubleshooting
- 11. Warranty
- 1. Introduction
- 2. Découvrez votre PLATINUM SE
- 3. Assemblage de la platine
- 4. Branchement de votre PLATINUM SE
- 5. Lecture d'un enregistrement
- 6. Une fois la lecture terminée
- 7. Connexion à un appareil Bluetooth
- 8. Connexion à un ordinateu
- 9. Entretien
- 10. Dépannage
- 11. Garantie
- Platinum_SE_manual_last_page2
34 © sonoro audio GmbH 2021
• Release the tonearm rest clamp.
• Raise the tonearm lifter.
• Holding the finger lift of the headshell, move
the tonearm over the turntable.
• Lower the tonearm lifter.
• Adjust the counterweight so that the tonearm
is floating parallel to the turntable.
• Return the tonearm to its original position.
• Lock the tonearm rest clamp.
9. Setting the tracking force
• Turn the tracking force gauge ring so that the
center line aligns with 0 on the scale.
• Only turn the ring. Be careful not to let the
counterweight turn.
• Turn the counterweight and the tracking force
gauge ring together so that the tracking force
gauge ring scale matches the stylus pressure
specified for the cartridge.
Tonearm rest clamp
Tonearm lifter
Center line
Tracking force
gauge ring