User Manual
Table Of Contents
- PLATNIUM_SE_SO-2000_operating_manual_cover_page4
- PLATINUM_SE_SO-2000_manual_R07
- Bedienungsanleitung
- 1. Einleitung
- 2. Lernen Sie Ihren PLATINUM SE kennen
- 3. Plattenspieler montieren
- 4. PLATINUM SE anschließen
- 5. Eine Aufnahme abspielen
- 6. Wenn die Wiedergabe beendet ist
- 7. Verbindung mit Bluetooth-Gerät herstellen
- 8. Anschließen an einen Computer
- 9. Wartung
- 10. Fehlerbehebung
- 11. Garantie
- 1. Introduction
- 2. Getting to know your PLATINUM SE
- 3. Assembling the turntable
- 4. Connecting PLATINUM SE
- 5. Playing a record
- 6. When playback finishes
- 7. Connecting with Bluetooth device
- 8. Connecting to a computer
- 9. Maintenance
- 10. Troubleshooting
- 11. Warranty
- 1. Introduction
- 2. Découvrez votre PLATINUM SE
- 3. Assemblage de la platine
- 4. Branchement de votre PLATINUM SE
- 5. Lecture d'un enregistrement
- 6. Une fois la lecture terminée
- 7. Connexion à un appareil Bluetooth
- 8. Connexion à un ordinateu
- 9. Entretien
- 10. Dépannage
- 11. Garantie
- Platinum_SE_manual_last_page2
38 © sonoro audio GmbH 2021
1. Switch on the turntable.
• Press the ON/OFF button on the back of the
turntable to turn it on.
2. Open the dust cover gently.
3. Remove the stylus protective cover.
4. Place a record on the platter
• Place the record on the mat of the platter
so that the center hole aligns with the
spindle.
•
To play 7-inch (17cm) records (EP records),
place the supplied 45 RPM adapter on the
spindle.
5. Use the Speed / STOP rotatory switch
knob
Note:
• The rotation speed is usually printed on the
center label of the record or the record jacket.
• The rotation speed can be set to 33 or 45
RPM. Select the rotation speed appropriate
for the record.
• When the Speed / STOP rotatory switch knob
is set to 33 or 45 position, the platter will start
rotating.
6. Release the tonearm rest clamp.
7. Raise the tonearm lifter.
USB
PRE AM P
OFF
ON
Record
45-RPM adapter