Bedienungsanleitung
sonoro audio GmbH Unter Goldschmied 6 50667 Köln Germany info@sonoro-audio.com www.sonoro-audio.com 09/09 Der Hersteller arbeitet ständig an der Weiterentwicklung aller Typen und Modelle. Bitte haben Sie Verständnis dafür, dass deshalb jederzeit Änderungen des Lieferumfangs in Form, Ausstattung und Technik möglich sind. Aus den Angaben, Abbildungen und Beschreibungen dieser Bedienungsanleitung können daher keine Ansprüche hergeleitet werden.
1. Sicherheitshinweise .................................................................................................. 4 1.1 Niemals selbst reparieren .................................................................................... 4 1 2 Der CD-Spieler .................................................................................................... 4 1 3 Reinigung und Aufbewahrung ............................................................................. 4 1.4 Betrieb ..........................
1. Sicherheitshinweise Stellen Sie das Gerät auf eine feste, ebene Oberfläche. Achten Sie darauf, dass • • • • • • das Gerät nicht verdeckt wird, damit immer eine ausreichende Luftzirkulation gewährleistet ist; keine direkten Wärmequellen (z. B. Heizungen) auf das Gerät wirken; kein direktes Sonnenlicht auf das Gerät trifft; der Kontakt mit Feuchtigkeit, Wasser oder Spritzwasser vermieden wird (stellen Sie z. B. keine Vasen auf das Gerät); das Gerät nicht in unmittelbarer Nähe von Magnetfeldern (z. B.
Verbinden Sie das Netzteil mit einer gut zugänglichen Netzsteckdose. Deutsch 1.4 Betrieb 1.5 Uhren Batterie Dieses cubo Modell verfügt über eine austauschbare Batterie (CLOCK BATTERY) zur Sicherung des Uhrenspeichers. Im Fall einer Stromunterbrechung, etwa durch einen Stromausfall, werden Ihre Weckzeit und Uhrzeiteinstellungen gesichert. Die gesamte Displaybeleuchtung und die Weckalarmfunktionen werden ausgeschaltet.
2. Inbetriebnahme 2.1 Standby/Einschalten/Ausschalten Wenn das Gerät mit Strom versorgt ist, befindet es sich im Standby-Betrieb. Die Uhrzeit im Display leuchtet. Um das Gerät einzuschalten, drücken Sie die Taste STANDBY. Drücken Sie wiederum Standby, um das Gerät wieder auszuschalten. 2.2 Kopfhörer anschließen Sie haben die Möglichkeit, einen Kopfhörer anzuschließen. Verbinden sie dazu den Kopfhörer mit der Buchse auf der Rückseite des Gerätes. 2.
Deutsch 3.
cubo Oberseite: cubo Rückseite: 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 im Radio-Betrieb 17 14, 15, 16 Radio-Stationstasten 18 Snooze Alarm 1 19 Alarm 2 im CD-Betrieb 20 FM ANTENNA UKW Antenne 14, 15, 16 Direktwahl für Titel 1-6 21 EXT/IN Antennenwahlschalter im MP3-CD-Betrieb 22 LINE OUT Audio Ausgang 15 10 Titel zurück springen 23 AUX-IN Anschluss Audio Eingang 16 10 Titel vor springen 24 CLOCK BATTERY Batteriefach (Extern/Intern) 1 Tuning + nächster Ordner / nächstes Album 2
Deutsch Fernbedienung: 1 Alarm 1 im MP3-CD-Betrieb 2 Volume Lautstärkeregelung - 12 Tuning + nächster Ordner / nächstes Album 3 Volume Lautstärkeregelung + 13 Tuning - vorheriger Ordner / vorheriges Album 4 Play CD Wiedergabe / 5 Pause CD Pause im iPod® Betrieb mit eDock (optional erhältlich) Standby Gerät einschalten und in 4 Standby schalten Play Wiedergabe starten/ Pause Wiedergabe Pause 6 Menu Einstellungen 7 Mode Betriebsart drücken Wechsel in die nächst höhere 8 Favorite wied
4. Grundfunktionen einstellen 4.1 Uhrzeit stellen 1. 2. 3. 4. 5. 6. 7. Schalten Sie das Gerät in den Standby Modus. Drücken Sie Menu, die Uhrzeit blinkt. Drücken Sie erneut Menu, die Stundenanzeige blinkt. Stellen Sie mit den Lautstärketasten die gewünschte Stunde ein. Drücken Sie eine der Skip Tasten, die Minuten blinken. Stellen Sie die Minuten mit den Lautstärketasten ein. Zum Speichern drücken Sie erneut Menu. 4.2 Wählen zwischen 12 und 24-Stunden Anzeige 1. 2. 3. 4. 5.
Wählen Sie bei eingeschaltetem Gerät mit der Taste Mode den Radiobetrieb. Im Display wird die UKW Radio-Frequenz angezeigt. Deutsch 5. FM (UKW) Radiobetrieb 5.1 Sender einstellen Drücken Sie Tuning+ oder Tuning-, um manuell Sender zu suchen oder halten Sie die Taste zwei Sekunden gedrückt, bis der automatische Sendersuchlauf startet.
im Stop Modus machen. Haben Sie mehrere Titel auf einer MP3-CD, so haben Sie die Möglichkeit über die Stationstasten 5 (15) und 6 (16) in 10er Schritten vor bzw. zurück zu springen. 6.2 Titelsuchfunktion Halten Sie während der Wiedergabe eine der Skip Tasten gedrückt und der Suchlauf startet. Lassen Sie die Taste an der gewünschten Position wieder los. 6.3 Wiederholfunktion 1. Drücken Sie während der CD-Wiedergabe zweimal die Taste Menu. 2.
Wiederholen Sie die letzten zwei Schritte, bis alle Titel gespeichert sind. Um die programmierte Wiedergabe zu starten, drücken Sie erneut Menu. Um die programmierte Wiedergabe abzubrechen, drücken Sie Stop. Um die Funktion zu beenden, drücken Sie zweimal Menu und anschließend so oft Skip Forward, bis die Anzeige am unteren Rand des Displays erlischt. 10. Drücken Sie abschließend erneut Menu, um die Eingabe zu bestätigen. Deutsch 6. 7. 8. 9. 6.
8. Weckbetrieb 8.1 Alarmfunktion Sie können zwei verschiedene Alarm-/Weckzeiten programmieren. 1. Drücken und halten Sie eine der zwei Alarm Tasten bis die Zeit blinkt. 2. Wählen Sie mit den Lautstärketasten die Stunden und bestätigen Sie diese mit der Skip Taste. 3. Stellen Sie nun mit den Lautstärketasten die Minuten ein. 4. Bestätigen Sie die Eingabe mit der entsprechenden Alarm Taste. 5. Wählen Sie nun über die Mode Taste, ob Sie mit CD, iPod®, AUX*, FM (UKW) oder Buzzer geweckt werden wollen. 6.
9.1 Verpackung Deutsch 9. Entsorgung Ihr Design CD-Radio befindet sich zum Schutz vor Transportschäden in einer Verpackung. Verpackungen sind Rohstoffe und somit wiederverwendungsfähig oder können in den Rohstoffkreislauf zurückgeführt werden. 9.2 Gerät Werfen Sie das Gerät am Ende seiner Lebenszeit keinesfalls in den normalen Hausmüll. Erkundigen Sie sich nach Möglichkeiten einer umwelt- und sachgerechten Entsorgung.
10. Fehlersuche Achtung! Versuchen Sie auf keinen Fall das Gerät selbst zu reparieren; dadurch erlischt der Garantieanspruch. Öffnen Sie das Gehäuse nicht, da die Gefahr von elektrischen Schlägen besteht. Wenn eine Fehlfunktion auftritt, prüfen Sie zuerst die unten aufgeführten Punkte, bevor Sie das Gerät zur Reparatur bringen. Wenn Sie einen Fehler anhand dieser Empfehlungen nicht beheben können, wenden Sie sich bitte an Ihren Händler oder an unseren Kundenservice.
Netzteiladapter: Ktec, KSAFF1200250W1EU Eingang: 100-240V ~ 50/60Hz 0.8A Ausgang: 12V 2.5A Leistungsaufnahme in Standby : < 2W Deutsch 11. Technische Daten CD Player: Laser Klasse 1 AUX-Eingang: 3,5mm Klinkenstecker RF-Fernbedienung, type : RC-3 Betriebsfrequenz: 433,92 MHz Batterie: Lithium-Batterie, Typ: CR 2032 Frequenzbereich FM: 87,5 MHz --- 108,0 MHz Technische Änderungen vorbehalten.
12. Garantieansprüche Für die Geltendmachung von Garantieansprüchen gilt – ohne, dass dadurch Ihre gesetzlichen Rechte eingeschränkt werden – Folgendes: • • • • Garantieansprüche können nur innerhalb eines Zeitraumes von max. 2 Jahren, gerechnet ab Kaufdatum, geltend gemacht werden. Innerhalb dieser Garantiezeit beseitigen wir nach unserer Wahl, durch Reparatur oder Austausch des Geräts, unentgeltlich alle Mängel, die auf Material- oder Herstellungsfehlern beruhen.
0913-610-09