Operation Manual

Manual tuning
Prerequisite:
The DAM/FM antenna is connected.
Fig. 32: Manual tuning
1. Press and hold the click wheel to activate the
manual station search function.
ð
The display shows the [Manual Tune]
(Fig. 32) text.
2. Turn the click wheel or press the [Next] or
[Previous] buttons to change the frequency
range.
3. Press the click wheel to confirm your selection.
Automatic tuning
The automatic station search function automatically
creates and saves a station list with up to 30 stations.
The stations are sorted according to the strongest
reception.
Prerequisite:
The DAM/FM antenna is connected.
Fig. 33: FM preset list
1. Press the [Menu]button.
ð
The display shows the [FM Preset List]
(Fig. 33) text.
2. Press the [Next] button.
ð
The display shows the [FM Auto Search] text.
3. Press the click wheel.
ð
The display shows the [Auto Search YES] text.
4. Press the click wheel again.
ð
The automatic search function is started.
After the search is complete, the device will
jump to the first station on the list.
Storing FM stations
Fig. 34: Storing FM stations
1.
Set the radio station as described in Ä ‘Auto‐
matic tuning’ on page 89 or Ä ‘Manual tuning’
on page 90.
2. Press and hold one of the station preset buttons
on top of the device or the remote control.
ð
The station preset is displayed.
i
You can save up to 6 FM stations.
Retrieving saved FM stations
1. Briefly press one of the station preset buttons
on top of the device or the remote control.
ð
The selected station is played.
11.2 DAB radio
Searching a DAB station
Automatic tuning
Prerequisite:
The DAM/FM antenna is connected.
Fig. 35: Automatically searching a DAB station
1. Press the [Menu] button in DAB playback mode.
ð
[DAB Full Scan] (Fig. 35) appears in the dis-
play.
2. Press the click wheel on the device or the [OK]
button on the remote control to activate.
ð
The device will now search for available
radio stations and play back the first avail-
able station.
90