Operation Manual

13 Bluetooth playback
Mobile phones and other Bluetooth-enabled devices
can be connected to the radio via Bluetooth.
i
Use the manual of your mobile phone or your
device for help.
Fig. 41: Setting the Bluetooth mode
1. Switch on the device.
2. Press the [MODE] button on the front of the
device or the [Bluetooth] button on the remote
control.
ð
The Bluetooth mode is now active (Fig. 41).
i
Alternatively, you can also use the [Next]
or [Previous] buttons to set the mode.
3. Connect your mobile phone or your device to
the radio via Bluetooth.
i
Ener code ‘0000’ .
i
The radio can store up to 8 devices and connects
itself automatically with previously configured
devices if Bluetooth is enabled.
13.1 Connecting Bluetooth devices
Fig. 42: Searching for Bluetooth
1. The Bluetooth symbol will flash on the display
and the [Searching] (Fig. 42) text appears.
2. After connecting, the display permanently
shows the [Bluetooth] text.
13.2 Playing music via Bluetooth
Starting playback
1. Press [Play] on the front of the device or on the
remote control to start playback.
Pausing playback
2. To pause playback, press [Play] again.
14 AUX playback
You can connect and play additional audio devices to
the radio via the AUX port on the back of the device.
Fig. 43: Activating AUX Playback
1.
Switch on the device.
2. Press the [MODE] button and select [AUX] mode
or press the [AUX] button on the remote con-
trol.
i
Alternatively, you can also use the [Next] or
[Previous] buttons or the click wheel to select
the mode.
ð
The AUX symbol (Fig. 43) appears on the dis-
play
3. Turn on the external device and start playback
on the external device.
i
You cannot operate an external device using the
buttons on the radio.
15 USB playback
You can connect additional devices to the radio and
play music through the USB Charge & Playback port
on the back.
i
The MP3 and WMA formats can be played.
93