Operation Manual

Malfunction Possible cause Elimination

Battery is empty Replace the battery of your remote

control (see

Chapter 7.5 ‘Pre‐

paring the remote control’

on page 83).

Malfunctions due to other radio

transmitters or devices

Increase the distance between the

source of interference and the

radio. Plug the device into another

socket so that the source of inter-

ference and the radio are con-

nected to different branch currents.

Alarm does not work Alarm is not switched on

Switch on the alarm (see

Chapter

9.5 ‘Switching on/off the alarm

clock’ on page 88).

Alarm volume is set to minimum Increase the volume (see

Chapter 9.3 ‘Setting the alarm

volume’ on page 88).

Headphones are connected Pull the headphones out of the

jack.

19 Cleaning

L NOTICE!

Material damage from improper cleaning!

Only clean the device from the outside using a

dry, soft cloth. Never use abrasive or solvent-

based cleaning agents as these may damage the

surface of the device.