User Guide

Table Of Contents
SONOS USER GUIDE
2. Use a pointed tool to pierce through the template and mark the mounting holes. Mark closer to the
corners of the holes.
3. Remove the template.
4. Drill pilot holes.
Wall mounting information
5. Insert and secure the wall anchors (don’t use the anchors if drilling into wood).
Wall Material Pre Drill Use Wall Anchors Use Screws
Wood Stud 1/8" (3 mm) bit
No Yes
Drywall (no stud) 3/16" (4.5 mm) bit Yes Yes
Hard wallboard or double board 3/16" (4.5 mm) bit Yes Yes
Plaster 1/4" (6.5 mm) bit Yes Yes
Concrete or Brick 1/8" (3 mm) bit Yes Yes