User Manual

Product Guide
10
Adding a PLAYBAR
Prior to installing the Sonos PLAYBAR, make sure all external components, such as your cable box, DVD
player, etc. are connected directly to your TV.
If you have any existing home theater or surround sound equipment, disconnect it from your television.
1. Choose a location for the PLAYBAR. Refer to the PLAYBAR Product Guide for help with this step.
2. Remove the protective cap from each end of the optical audio cable.
3. Connect the optical audio cable (supplied) from your TV’s digital audio out (optical) to the PLAYBAR’s
digital audio in (optical) being careful not to twist or bend the cable. The PLAYBAR’s digital audio in and
the optical cable are ’D-shaped’—be sure to align for proper insertion.
4. Attach the power adapter to the PLAYBAR and apply power. Be sure to push the power cord firmly into
the PLAYBAR until it is flush with the surface.
(For additional information, see the full Sonos PLAYBAR product guide:
Sonos PLAYBAR Product Guide.)
Note: Expandable PLAYBAR home theater setup
For a 3.1 home theater experience, bond a SUB with your PLAYBAR.
For a 5.0 home theatre experience, bond a pair of PLAY:1 or PLAY:3 speakers with
your PLAYBAR.
For a 5.1 home theater experience, bond a SUB and a pair of PLAY:1 or PLAY:3
speakers with your PLAYBAR.
IMPORTANT: Be sure to remove
the protective caps from each end
of the supplied optical audio cable
before inserting.