User Manual
Table Of Contents
Product Guide
20
Using the Sonos app on a mobile device
To play music from this line-in source:
1. Select Line-in from the Sonos music menu.
2. Choose the room the device is connected to, and select Play Now.
To change the settings for this line-in source:
1. Select Settings -> Room Settings from the Sonos music menu.
2. Select the Sonos product the device is connected to, and then touch Line-In.
• Line-In Source Name: Select a component name from the list.
• Line-In Source Level: A default (typical) line-in source level is automatically assigned based upon the
source name. (If the volume sounds too low, you can select a higher line level. You may experience
clipping at higher volume levels if you set the level too high.)
• Autoplay Room: Select the room you want your line-in source to play in whenever it’s connected to
Sonos. You can also select Include Grouped Rooms so that any rooms grouped with the autoplay room
will play the same music.
• Use Autoplay Volume. Set Use Autoplay Volume to Yes if you intend to use your line-in device to adjust
the volume in the autoplay room. Use the slider to set a default volume for the autoplay room whenever
the line-in device is connected.