Operation Manual

Product Guide
4
CONNECT Back
Ethernet switch connectors (2)
• Flashing Green (network activity)
• Yellow (link connection)
AC power (mains) input 
(100 - 240 VAC, 50/60 Hz)
Analog audio in
Analog audio out (fixed/variable)
TOSLINK® digital audio out
Coaxial digital audio out
Play/Pause Toggles between playing and pausing the audio in this room (defaults to restarting the
same
music source when pressed unless a different source is selected).
• Press once to start or stop streaming audio
• Press twice to skip to the next track (if applicable to the selected music source)
Volume up (+) 
Volume down (-)
Press these buttons to adjust the volume up and down.
You can use an Ethernet cable (supplied) to connect to a router, computer, or additional
networ
k device such as a network-attached storage (NAS) device.
LED indicators:
Use only the supplied power cord to connect to a
power outlet (using a third party power
cord will void your warranty).
Use a standard RCA audio cable to connect the audio outputs from a separate audio
compon
ent such as a CD player, to the SONOS CONNECT’s analog audio inputs.
Use a standard RCA audio cable to connect the Sonos product
’s analog audio outputs to
the audio inputs on a separate audio component, such as an amplifier or your home
theater receiver.
You can use a TOSLINK optical audio cable to connect the SONOS CONNECT’s TOSLINK
di
gital audio output to the audio inputs on a separate audio component, such as an
amplifier or your home theater receiver.
You can use a digital coaxial cable to connect
the Sonos product’s coaxial digital audio
output to the audio inputs on a separate audio component, such as an amplifier or your
home theater receiver.