User Guide

SONOS USER GUIDE
Attach feet (optional)
If you’re placing Sub horizontally on a floor, you can attach permanent felt feet (available upon request,
contact Sonos Support) to protect your floor. If you’re putting it on a rug or using it vertically, no need to
adhere the felt feet.
Note: The felt feet are not removable—a strong adhesive will keep them permanently attached to Sub.
1. Lay Sub down so the Sonos logo is facing down. Make sure you adhere the felt feet to the side that
doesn’t have the Sonos logo.
2. Place the enclosed guide on one corner of the unit and fold the flaps over the edge.
3. Peel the backing off one of the feet.
4. Press the felt foot (sticky side down) onto the unit inside the circular portion of the guide.
5. Attach the other 3 felt feet the same way.
Connect the cables
Attach the power cord and plug in Sub. Be sure to push the power cord firmly into Sub until it is flush with the
surface.
If you don’t have the app, download it from the app store. You’ll use it to set up and control your Sonos
system. See Getting started
. Make sure you set up at least one speaker before adding Sub.
Note: After Sub is paired with a Sonos speaker, you won’t see it displayed separately in . Any changes
you make to that Sonos speaker (volume, mute, music selection) will also affect Sub.
Guide for felt
foot placement
Felt foot