INSTALLATION MANUAL SO NOS OUTD OOR BY SON AN CE
Product Description Types of Wire Thank you for purchasing SONOS OUTDOOR by SONANCE weather-resistant speakers. When installing SONOS OUTDOOR by SONANCE Speakers careful consideration should be made when determining speaker placement and wire gauge. Refer to the wiring chart (see figure 2) to determine which size wire to use over the given distance between the SONOS Amplifier and the speakers. When properly installed, these speakers will give you many years of outdoor entertainment pleasure.
5. Slide the speaker onto the bracket and firmly snap into place at the top and bottom of speaker. Pull enough wire through the front of the speaker to allow connection to the terminals (see figure 7). NOTE: BE SURE THAT THE BRACKET CLIPS SNAP COMPLETELY INTO PLACE TO PREVENT ANY BLOCKAGE WITHIN THE SPEAKER PERIMETER WHERE THE GRILLE IS TO BE INSERTED. PULL THE SPEAKER GENTLY TOWARD YOURSELF TO VERIFY THAT IT IS SECURELY IN PLACE.
TO UTILIZE THE AUDIO ENHANCEMENTS: 1. Download the SONOS mobile app from the app store on a mobile device. 2. Open the app and follow the prompts to set up your SONOS system. 3. After Amp is set up, go to Room Settings and choose the room your speakers are in. 4.Select Advanced Audio -> Detect SONOS Architectural to unlock the audio enhancements. Painting the Speaker and Grille All SONOS OUTDOOR by SONANCE speakers feature a tough polypropylene enclosure that can be painted.