Owner's Manual
Table Of Contents
Product Guide
8
Surround settings
The default audio settings are determined by the calibration process. If you wish to make a change, you can follow the steps
below.
Using a handheld Sonos controller
1.
From the Settings menu, select Room Settings.
2.
Select the room the SONOS PLAYBAR and surround speakers are located in. It appears as Room (+LS+RS) on the Room
Settings menu.
3.
Select Advanced Audio -> Surround Settings.
4.
Choose one of the following:
• SURROUNDS: Choose On or Off to turn the sound from the surround speakers on and off.
• Drag your finger across the slider to increase or decrease the volume of the surround speakers.
Using the Sonos Controller for Mac or PC
1.
Select Manage -> Settings (PC) or Sonos -> Preferences (Mac).
2.
Select Room Settings if it is not already highlighted on the left.
3.
Choose the room the SONOS PLAYBAR and surround speakers are located in from the Room Settings for drop-down.
4.
Select the Surrounds tab.
5.
Choose one of the following:
• SURROUNDS: Check to turn the sound from the surround speakers on; uncheck to turn it off.
• Click and drag the slider to increase or decrease the volume of the surround speakers.
6.
Close the Settings window when changes are complete.
Removing surround speakers
Using a handheld Sonos controller
1.
From the Settings menu, select Room Settings.
2.
Select the room the surround speakers are associated with. The room name appears as Room (+LS+RS) on the Room
Settings menu.
3.
Select Remove Surround Speakers.
4.
Select Next to drop the surround sound speakers from your surround system. If these were newly purchased PLAY:1s
they will appear as Unused on the Rooms menu. If these PLAY:1s existed in your household previously, they revert back
to their previous state.
You can now move them to another room for individual use. If you want to add them back as surround speakers, see
"Surround Speakers" on page 7 for help.