User's Manual

Product Guide
10
8. Place the PLAYBAR flat against the wall and lower it gently until the screw heads fit securely into the keyhole brackets on
the back of the PLAYBAR. (Once the unit is flat against the wall, it should slide approximately 1/2” (10mm) down until the
screw head is securely in the slots.)
HOW TO TURN OFF YOUR TELEVISION’S SPEAKERS
While we can’t provide specific instructions for every television model, here’s a solution that often works. If it doesn’t work for
you, please consult the owner’s guide that was packaged with your television.
1. Look for a Menu or Setup button on your television’s remote control (not your cable remote control) and press it.
You should see an on-screen menu appear.
2. Look for an option to control audio functions and select it.
3. Look for a setting to turn off your TV’s internal speakers and select it.
If you can’t turn off your TV internal speakers, don’t worry. To enjoy the best performance from your PLAYBAR, you’ll want to
turn the sound on your TV all the way down. Use the following steps to adjust the volume balance between your TV and the
PLAYBAR.
1. Turn the TV volume all the way down using the control buttons on your television.
2. Using the volume control buttons on your PLAYBAR, set the volume to a normal listening level (do not use
the remote control).
After you make these adjustments, your PLAYBAR should always be louder than your TV speakers. Then simply use the
TV remote control to adjust the volume as you normally do.
HOW TO SET UP A REMOTE CONTROL FOR YOUR PLAYBAR
Important Note: If adjusting your TV’s volume also adjusts the volume of your PLAYBAR, then following the instructions below
is not necessary. Your remote will control the PLAYBAR without programming.
Programming Instructions: Your PLAYBAR is currently programmed to respond to the remote control that is included with the
product. However, we strongly recommend that you program the PLAYBAR to also respond to your existing remote control
using the steps illustrated below thereby enabling you to operate everything using a single remote.
Example: To have your PLAYBAR learn the “Volume Up” command of your remote control:
1. Press and hold “LEARN” on the PLAYBAR until the LED blinks orange.
2. Press “Volume Up” ( ). LED stops blinking and remains While holding your TV’s remote within 1-2 feet of the PLAYBAR,
quickly tap the “Volume Up” ( ) button approximately 4 times. With each tap the status LED should blink quickly (like a
strobe). After the 4th button press the status indicator LED should blink green for about 3 seconds.
Repeat steps 1-3 to program “Volume Down” ( ), Mute and Power buttons ( ).
Equalization (Sound Settings)