User's Guide

SONOS USER GUIDE
Controls and lights
Connector panel
Status light Indicates the status. For more information, see 
https://faq.sonos.com/led.
Ethernet ports (2) You can use an Ethernet cable (supplied) to connect to a
router, computer, or additional network device like a
network-attached storage (NAS) device.
LED indicators:
• Flashing Green (network activity)
• Yellow (link connection)
DC power (mains) input Use only the supplied power cord (using a third-party
power cord will void your warranty).
Analog audio in Use a standard RCA audio cable (supplied) to connect
the audio outputs from a separate audio component,
like a pre-amplified turntable, to Neptune’s analog audio
inputs.
Analog audio out Use a standard RCA audio cable (supplied) to connect
the Sonos product’s analog audio outputs to the audio
inputs on a separate audio component, like an amplifier
or your home theater receiver.
Coaxial digital audio out You can use a digital coaxial cable to connect the
Sonos product’s coaxial digital audio output to the
audio inputs on a separate audio component, like an
amplifier or your home theater receiver.
Digital audio
out
Aux line-in
Line-out