User Guide

SONOS USER GUIDE
Back
Charging
Select a location
You can put your speaker just about anywhere. Here are a few guidelines:
• Move is made to give you powerful sound anywhere—auto Trueplay tuning periodically balances the
sound for wherever you are and whatever you’re listening to. The microphone has to be on for automatic
tuning so if you don’t leave the microphone on all the time, turn it on for a few minutes whenever you
move your speaker so it can automatically adjust the sound for your new surroundings.
• Move sounds great even when placed next to a wall or on a shelf. For best performance, leave at least
1" (2.5 cm) space around the back of the speaker.
• It’s ultra durable. With a tough outer shell and IP56 rating, Sonos Move is built to withstand falls, bumps,
Join button Press to connect to your Sonos system during setup.
USB-C port Use a compatible USB-C charger for charging on the
go.
• USB port may also be used for diagnostic purposes.
(It can’t stream large data files, like some music
files).
Note: USB-C cable not included.
Power button Press to power on; short press to put to sleep; long
press (5 seconds) to power off.
If Move is off the charging base, it goes to sleep to save
battery when you’re not using it. Just press the power
button to wake it up.
Bluetooth/WiFi
toggle button
Toggles between Bluetooth and WiFi. Use WiFi for
setup; stream content over WiFi or Bluetooth
®
.
Handle Allows for easy lifting and carrying so you can take the
speaker wherever you go.
Charging base
(included)
• Just set Move on the charging base for easy
recharging—no extra wires or cables needed.
• Make sure the speaker is seated properly in the
base and the charging contacts are touching.
• Charging base is for indoor use only—be sure to
keep it dry.
Note: Move’s remaining battery life is always visible in
the Sonos app.
AC power 100-240 VAC, ~50/60 Hz, 1.2 A. Output: 18.0 VDC,
2.5 A, 45.0W
USB port for
charging on the go
Use a compatible USB-C charger (type C PD power
with 45W, 20V/2.25A)