The Wireless HiFi System Manual

Product Guide

SONOS CONNECT:AMP Back

Ethernet switch connectors (2) Use Category 5 Ethernet cable to connect to a router, computer, or additional network

device such as a network-attached storage (NAS) device.

LED indicators:

• Green (link connection)

• Flashing Yellow (network activity)

Right speaker terminals Use high-quality speaker wire to connect the right speaker to the CONNECT:AMP.

Left speaker terminals Use high-quality speaker wire to connect the left speaker to the CONNECT:AMP.

Voltage select 115V/230V

Select the appropriate voltage setting for your country.

AC power (mains) input Use the supplied power cord to connect to power outlet.

Analog audio in You may use a standard RCA audio cable to connect the CONNECT:AMP’s analog audio

inputs to the audio outputs from a separate audio component, such as a CD player or a

portable music player.

Subwoofer output

Note: If you disconnect your subwoofer, make sure to

also disconnect the subwoofer’s cable from the

CONNECT:AMP output.

You may connect a powered subwoofer to this output using a standard RCA cable. The

system will detect when a cable is connected to the subwoofer output and adjust the

crossover frequency automatically.