Operation Manual

Sonos ZonePlayer 120

ENGLISH

Adding to an Existing Sonos System

Once you’ve got a Sonos Multi-Room Music System set up, you can easily add more

Sonos components any time (up to 32 zones).

If your house has structured (built-in) wiring, you can make a wired connection to the

additional ZonePlayers or ZoneBridges. If you don’t, our built-in wireless technology

is ideal for you.

Add a Zone

1. Choose one of the following options:

• If you are adding an amplified ZonePlayer 120, attach desired speakers.

(Power rating should be at least 75W for 8 Ohm speakers and at least

150W for 4 Ohm speakers.)

• If you are adding a ZonePlayer 90, connect it to an external amplified device.

• If you are adding a ZoneBridge, attach the power adapter.

Note: If you are replacing the ZonePlayer or ZoneBridge that is

currently attached to your router, first add the new Sonos

component to your music system (steps below.) You can then

unplug the wired Sonos component from your router, replace it

with the new one, and move the original ZonePlayer or ZoneBridge

to a new location.

If you are using speaker wire, use your finger to firmly

push the spring-loaded speaker posts inward to reveal the

connection hole.

If your speakers have banana connectors, you can insert

the plugs directly into the banana jacks on the back of the

ZonePlayer (available in North America only.)

Downloaded from www.Manualslib.com manuals search engine