Operation Manual

Sonos ZonePlayer 120

ENGLISH

Using Line-In

You can easily stream an external source such as a CD player or portable music

player through your Sonos Multi-Room Music System using the audio-in connections

on your ZonePlayer. The device will be automatically detected as soon as you plug it

in.

• Use a standard RCA cable to plug an external source like a CD player into the

analog Audio In connections on the back of your ZonePlayer 120.

• If you are connecting a portable music player to the ZonePlayer 120, you will

need a 1/8 inch mini-stereo to RCA audio cable instead. Plug the mini-stereo

end into the portable device and the RCA end into the Audio In connection on

the ZonePlayer.

Using a Sonos Controller:

• To play music from this line-in source, select Line-In from the Music menu,

select the source, and select Play Now.

• To change the name of this device, select Settings→ZonePlayer Settings.

Select the ZonePlayer this source is connected to, and then touch Line-In

Source Name. Select a new name from the list, or type a unique name.

• To change the line-in level, select Settings→ZonePlayer Settings. Select the

ZonePlayer this source is connected to, and then touch Line-In Source Level.

AC power (mains) input

Use the supplied power cord to connect to power outlet.

Analog audio in

You may use a standard RCA audio cable to connect the

ZonePlayer’s analog audio inputs to the audio outputs

from a separate audio component, such as a CD player

or a portable music player.

Subwoofer output

Note: If you disconnect your

subwoofer, make sure to also

disconnect the subwoofer’s cable

from the ZonePlayer output.

You may connect a powered subwoofer to this output

using a standard RCA cable. The system will detect

when a cable is connected to the subwoofer output and

adjust the crossover frequency automatically.

Downloaded from www.Manualslib.com manuals search engine