Operation Manual

Sonos ZonePlayer 120

ENGLISH

Select a new level.

Using the Desktop Controller software:

• To play music from this line-in source, select the Line-In tab from the Music

Library, select the source, and click Play Now.

• To change the settings for this device, select the Line-In tab from the Music

Library, select the source, and click Setup. Select the Line-In tab to make

changes.

A default (typical) line-in level is automatically assigned when you select a source

name, but if the volume sounds too low, you can select a higher line level for this

device. (You may experience sound distortion at higher volume levels if you set the

level too high.)

Line-in encoding settings

When you have line-in music sources attached to a ZonePlayer, line-in encoding

determines how the Sonos Multi-Room Music System will encode the data coming

in from these sources. For multi-room audio, we recommend using the Compressed

setting. For the highest quality sound, you can select Uncompressed encoding, but

this selection requires more network bandwidth than compressed audio. For TV or

DVD audio, we recommend using the Uncompressed setting.

To change the line-in encoding setting, select one of the following options:

• Using the Sonos Controller, select Settings→Advanced Settings→Line-In

Encoding.

• Using the Desktop Controller for Windows, select File→Preferences and then

click the Advanced tab.

• Using the Desktop Controller for Macintosh, select Sonos→Preferences and

then click the Advanced tab.

For additional information on connecting audio devices, you can go to our Web site

at http://faq.sonos.com/cables.

Downloaded from www.Manualslib.com manuals search engine