User's Guide

19
4.7Proudct maintenance and protection
1, this product usage and storage conditions shall comply with the environmental
conditions of section 1.5 in this manual.
2, The prouduct power suppy shall be in accordance with section 1.6 of this manual.
3, If Stop using this product for a long period of time, ensure charging at least twice a
week, every time not less than 1 hour.
4, please do not open the probe cover for cleaning, shake or dismantle the
components inside the probe.
5, Clean and wipe the probe cover by alcohol cotton,and should be operated in the
power-off state.
6, this product should not be frequent startup and shutdown. After shutdown if
needed to start up again, please wait at least 1 minute of time for boot operation.
7, if instrument malfunction occur,pls ask professional staff for maintenance.
8, probes are valuble and vulnerable part,any collision or drop is forbidden.
9, Suspended in the diagnosis process, please press the button for freeze.The system in
the frozen statebenefit to probe for long-term use.
10,Apply the medical ultrasound coupling agent which complys with relevant
standards when using the probe.
11, the structure of the probe is watertight, prohibit any conductive liquid
immersionso as to avoid corrosion of the probe and the fuselage.
12,Probe into liquid shall not exceed the probe water lines, and regularly check for
cracks in order to avoid liquid immersion and damage to internal components.
13,After each usage,please refer to chapter 4 of this manual for cleaning and
disinfection.