User Manual

Vo l u um

Owner’s Manual

Creating your own presets

You can create and store up to 100 user presets on the Voluum. The steps for creating a preset are

straight-forward.

Creating and saving a user preset

Ensure that the

LOCK

switch is in the unlocked position. Starting from any preset (factory or

user), adjust the Voluum

settings using the

EFFECT

knob and the active and hi/lo buttons to

get the desired musical effect. These settings are discussed in detail later.

Save the preset. Press the save button. Use the  buttons to select a user preset

number (P00–P99) where you would like to store your preset. The name of the existing

preset (if any) flashes alternately with the preset number to help you select either an

unused preset or a preset to overwrite. Press the save button again when you have

selected your preset number. You can now edit the three-character preset name. Turn the

EFFECT

knob to cycle through A-Z, 0-9 and press the knob to advance to the next of the

three characters in the preset name. Finally, press the save button to write your preset to

the chosen location.

The save button flashes while this save process is in progress. To abandon the save at any

time, and revert to Preset Select mode, press and hold the save button for 2 seconds.