User Manual
Voluum
© Copyright 2014 Sonuus Limited 27
Owner’s Manual
The volume level can be set to a single value using the dB parameter. However, to set-up a traditional
volume pedal effect, select pedal control for the volume effect and then set a low value for the lo
dB parameter and a high one for the hi dB parameter. Now when you rock the footpedal from heel-
down to toe-down, the volume increases.
Changing the curve (Cur parameter) lets you adjust the “feel” of the footpedal, from the default
linear (lin) setting through to extreme settings where most movement happens at the heel-down
(hi9) or toe-down position (lo9).
SuS no −99 –40
Sustain in dB, relative to hi value of dB (
ADSR
).
Only available with envelope control.
rEL no 0·00–9·99
Release in seconds (
ADSR
).
Only available with envelope control.
thr no −80–0
The signal level drop (threshold) in dB required to trigger
the
ADSR
release. Only available with envelope control.
CtL no 0–127
MIDI
controller for volume.
Only available with
MIDI
control.
Parameter Controllable Range Description