User Manual

Voluum

Owner’s Manual

Custom settings

Further configurability of the Voluum is possible through custom. This lets you change the setup of

the V oluum to suit your own instruments or personal preferences. For example, you can adjust the

display

LED

brightness to a very low level to prolong battery life or to suit working in a darkened

studio.

The custom settings are different from all of the other parameters: they affect the Voluum’s set-up,

not the set-up of the current preset i.e., they are global settings. The custom settings are not stored

in a preset, they are stored in the V oluum itself. They take effect from when they are changed. They

are not changed by switching from one preset to another.

To make changes to the custom parameters, enter custom mode by pressing and holding the

EFFECT

knob for 2s.

Parameter Default Range Description

LEd 40 1–100

LED

brightness: 1 is minimum, 100 maximum. Reducing the

LED

brightness is useful for dark environments and for battery saving.

int Gtr

Gtr

bA4

bA5

Instrument (optimises note-retriggering for

LFO

and

ADSR

and

optimises envelope tracking)

guitar (perfect for guitar, but also good for 4-string bass. Use this

unless you experience problems with the lowest notes)

4-string bass (best to track the lowest notes of 4-string bass, but

also works well with 5-string bass)

5-string bass (best to track the lowest notes of 5-string bass)

SEn 0 −36–36

Applies a global adjustment for envelope mode sensitivity (SEn)

to compensate for instruments with different output levels.

Gives a range of ±36dB.

byP tru tru, buF Allows you to select true-bypass (tru) or buffered-bypass (buF)