User Manual

Voluum

Owner’s Manual

Firmware updating

To support new features and to make it future-proof, firmware (internal software) of the Voluum can

be upgraded.

To u p da te t h e Voluum firmware you will need to download the latest firmware file (.sfu) and

Firmware Updater software (which includes an instruction manual). The updater software is

available for both

OSX

and Windows. To access these files, you need to register and create a user

account at the following web site:

Note: if the Voluum detects that your firmware is corrupt, it will boot straight into update mode to let

you update the firmware.

Battery monitoring

When the battery level is getting low, bAt will periodically appear on the display to warn you.

To see the estimated percentage of battery life remaining, simultaneously press and hold the active

button and the  button. When using batteries, it is a good idea to check the remaining battery

capacity before a performance so that you can replace/recharge the batteries if required.

Note that when

USB

power are available, the displayed battery level will not show the correct

value, but will instead show a value related to the available supply voltage. This is because when an

alternative power supply is available, the batteries are disconnected to prolong their life.

To update firmware on the Voluum



While powering-on the Voluum, press and hold: active + .



The numeric display now shows UPd to indicate firmware update mode is active.



Connect the Voluum to your computer via

USB

(if not already done during power-on).



Follow the steps in the Firmware Updater manual you have downloaded.