User's Manual

Charging is

Complete

Power is OFF

Battery is

Charging

Power is OFF

Charging the battery

Connect the AC adapter to the phone and the other end to a standard

120V AC outlet as illustrated below. The charging time is about 5 hours.

You can charge the battery pack with the phone turned on, but charging

will take longer.

When the power is turned on

The letters “CH” are shown in the upper left

corner of the standby display and

flashes. This

indicates that the battery pack is being charged.

When the battery pack is fully charged, the letters

“FCH” appear instead and

stops flashing.

When the power is turned off

The message “Battery is Charging” is displayed

and

flashes.

When the battery pack is fully charged, the

message “Charging is Complete” is displayed and

stops flashing.

Notes

• If you make or receive a call when the battery pack is not charged

sufficiently, the call will be cut off. In that case, you will hear an alarm,

indicating that the battery is low.

• You can turn on the phone without the battery pack, but you cannot make

or receive a call, even if you connect the AC adapter to an AC outlet.

----SONY----

12:34P 12/25

:Saved #s

:Features

----SONY----

12:34P 12/25

:Saved #s

:Features

FCH

to an AC outlet

display

to the connector on the phone

(thumb indent faces upwards)

B2200 10-20draft3 8/21/98, 12:12 PM16